MEA026 Energy and Environment Professor Steven Shy (
)
Department of Mechanical Engineering National Central University November 18, 2005 (11
)
1
Consider a Spherical Cow A Course in Environmental Environmental Problem Problem Solving

John Harte University of California, Berkeley

John Harte holds a joint professorship in the Energy and Resources Group and the Ecosystem Sciences Division of the College of Natural Resources. He received a BA in physics from Harvard University in 1961 and a PhD in theoretical physics from the University of Wisconsin in 1965. 2
1
It is the mark of an instructed mind to rest satisfied with the degree of precision which the nature of the subject permits and not to seek an exactness where only an approximation of the truth is possible. --- Aristotle (384 (384 BC – March March 7, 7, 322 322 BC) BC) was an ancient Greek philosopher. Student of Plato and teacher of Alexadar the Great. Aristotle and Plato are often considered as the two most influential philosophers in Western thought. He wrote many books about physics, poetry, zoology, logic, government, and biology.
Aristotle
3
Content 
Chapter I
Warm-up Exercises

Chapter II
Tools of the Trade
a. Steady-state box models and residence times b. Thermodynamics and energy transfer c. Chemical reactions and equilibria d. Non-steady-state box models
4
2
It is the mark of an instructed mind to rest satisfied with the degree of precision which the nature of the subject permits and not to seek an exactness where only an approximation of the truth is possible. --- Aristotle (384 (384 BC – March March 7, 7, 322 322 BC) BC) was an ancient Greek philosopher. Student of Plato and teacher of Alexadar the Great. Aristotle and Plato are often considered as the two most influential philosophers in Western thought. He wrote many books about physics, poetry, zoology, logic, government, and biology.
Aristotle
3
Content 
Chapter I
Warm-up Exercises

Chapter II
Tools of the Trade
a. Steady-state box models and residence times b. Thermodynamics and energy transfer c. Chemical reactions and equilibria d. Non-steady-state box models
4
2
Chapter I Warm-up Exercise
1. Counting Cobblers and/or Dentists (1/2) How many (A) cobblers and/or (B) dentists are there in United States and/or in Taiwan ? A. How many cobblers are there in United States ?  One
cobbler does 15 repair jobs in a work day; repair jobs in a year = 15 x 5 x 4 x 12 = 3600  People in United States = 2.3 x 108 (1980)  Shoes repaired about every four years. So repair jobs needed to be carried out for each year = 2.3 x 108 /4 = 5.75 x 107.  Cobblers in United States = 5.75x107 /3600 = 15972 Approximate Answer ~ (1980) ~ 16000 (or 15000) ~ Approximate 6
3
1.Counting Cobblers and/or Dentists (2/2) B. How many dentists are there in Taiwan ? 

 

Population in Taiwan is 23 millions. Assuming people go to see the dentists four times per year in average. The dentist works 8 hours in a day and five days in a week. If consider holidays there are 44 weeks to work in a year. Assume one patient or one job takes 0.5 hour (30 min). So the total number of jobs done by a dentist per year = 8 x 2 x 5 x 44 = 3520 Thus, Dentists in Taiwan = 2.3 x 107 x 4 / 3520 = 26136 ~ 26000 or 25000 ~Approximate Answer~ 7
2. Measuring Molecules (1/2) 
Benjamin Franklin dropped oil on a lake’s surface and noticed that a given amount of oil could not be induced to spread out beyond a certain area. If the number of drops of oil was doubled, then so was the maximum area to which it would spread. His measurements revealed that 0.1 cm3 of oil spread to a maximum area of 40 m2.
How thick is such an oil layer?

8
4
2. Measuring Molecules (2/2)  
 
Denote the thickness of layer by the symbol d (m). If d is expressed in unit of meter, then the volume of that layer is (40d ) m3. (40d ) = 0.1 cm3 = 10-7 m3 d = 25 × 10-10 m = 25 Å ~ 12-25 atoms
9
3.The Size of an Ancient Asteroid (1/3) It has been proposed that dinosaurs and many other organisms became extinct 65 million years ago because Earth was struck by a large asteroid (Alvarez et al. 1980). The idea is that dust from the impact was lofted into the upper atmosphere all around the globe, where it lingered for at least several months and blocked the sunlight reaching Earth‘s surface. On the dark and cold Earth that temporarily resulted (Pollack et al. 1983), many forms of life then became extinct. Available evidence suggests that about 20 of the asteroid’s mass ended up as dust spread uniformly over Earth after eventually settling out of the upper atmosphere. This dust amounted to about 0.02 g/cm 2 of Earth’s surface. The asteroid very likely had a density of about 2 g/cm3 . How large was the asteroid? 10
5
3.The Size of an Ancient Asteroid (2/3)   
   
Dust amount to about 0.02 g/cm 2, The asteroid had a density of about 2 g/cm3 Suggesting that about 20％ of the asteroid’s mass ended up as dust spread uniformly over Earth. Earth has an area of 5.1 × 1014 m2 The asteroid had a mass = 1.02×1017g/0.2 = 5.1×1017 g The spherical asteroid mass M=ρV= ρ×4/3πR3 =>5.1×1017 g =2 g/cm3×4/3πR3 => R3 = 0.61×1017 cm3 => R 4 km 11
3.The Size of an Ancient Asteroid (3/3) Roughly, R equals 4 km. Given the rounded-off estimates that went into the problem, it suffices to say that th e di amet er of th e asteroid was about 10 km. 
12
6
4. Exhausting Fossil Fuel Resources (I) At the 1980 global consumption rate of petroleum, how long will it take to use up the estimated worldwide resource of this fuel?
Using data in the Appendix: 1. Earth’s petroleum resources: 10 22 J (1980) 2. Rate of consumption 1.35×1020 J/yr (1980)  The lifetime of Earth’s petroleum resources is quantity of resource T= rate of consumption in 1980 1.0 ×1022 J = = 74 yr. 1.35 ×1020 J/yr 
13
5. Getting Denser (1/3) If the global human population continues to grow at the rate it averaged between 1950 and 1980, how long will it take for the average human population density on Earth’s land to equal the present population density in typical urban areas of the world? 
Although the problem doesn’t state that the human population has been growing exponentially , this is a reasonable starting assumption. Hence, Let’s assume that between 1950 and 1980 the population, N(t), behaved as N(t) = N(0) e rt . (1) where t is time, t=0 is 1950, N(0) is the population in 1950, and r is a parameter called the rate constant. 14
7
5. Getting Denser (2/3) 
To begin, take the natural logarithm of Eq.(1): loge [N(t)] = loge [N(0)]+ rt (2) Eq.(2) tells us that if loge[N(t)] is plotted as a function of t, then the relation between logeN and t is that of a straight line with slope r.
A
slope of about 0.019/yr is obtained. Thus the rate constant for human population growth is about 1.9% per year.

The population density has to t=0 is 1950 be guessed. (There’s no “correct” answer.) Very large cities contain on the order of 10 7 people and occupy perhaps 10 3 km2, so let’s take the urban density to be 104 people/km2.
15
5. Getting Denser (3/3)  If
the total land area of Earth (1.5×108 km2) is potentially accessible, then the estimated 1980 population of 4.5 ×109 people dwelled at an average density about 30 people/km2.
 Because
land area is fixed, density grows at the same rate as population. Therefore, we need only calculate how long it will take for 30 (present density) to increase exponentially to 104 (urban density) at a rate constant of 0.019/yr. Letting T denote the time period in question, we must solve the equation: 10 4 = 30e 0.019T ⇒ T = 305 yr 16
8
6. The Greens We Eat (1/3) What fraction of the total annual plant growth on Earth was eaten by humans in 1983 ? You must make several choices before you can calculate this fraction.  First, Choose your units. You can determine the numerator and denominator in units of heat energy (e.g., calories) or in grams of carbon, dry-weight biomass, or wet-weight biomass.  Second, decide what is meant by annual plant growth. Will you take the green-plant production rate to be the gross primary productivity (total photosynthetic activity) or the net primary productivity (gross productivity minus losses due to plant respiration)? The answer will depend on which you choose. 
Third, be specific about the interpretation of human food consumption. Specially, you can count meat consumption on the
same caloric or weight basis as plant matter, or you can estimate how much plant matter it took to produce a unit of meat matter.
17
6. The Greens We Eat (2/3) 
We’ll solve the problem using energy units and net primary productivity (npp).

From the Appendix, the rate of human net food consumption is 1.8×1019 J/yr, and the primary productivity is 7.5×1016 (C)/yr. This is the net amount of carbon converted from CO 2 to carbon-containing organic molecules each year.

We need the unit conversion formula to convert (C)/yr to J/yr. From Appendix, energy content of dry biomass is 1.6 10 4 J/g(biomass)
npp (J/yr) =
npp [g(C)/yr]× energy content [J/g(biomass)] = 3.0 × 1021 J/yr carbon content [g(C)/g(biomass)]
The carbon content of dry biomass can be estimated by looking at Glucose (C 6 H 12O6 ) and using its fractional carbon content as an approximation.
carbon content =
g(C) 72 = = 0.4 g(biomass) 180 18
9
6. The Greens We Eat (3/3) 
The fraction of npp consumed by humans is rate of human food consumption (J/yr) npp (J/yr) 1.8 × 1019 J/yr = = 0.006 3.0 × 10 21 J/yr
f =
In words, the rate at which energy is consumed by humans as food is about 0.6% or 1/160 of the net rate at which energy is incorporated as plant matter in photosynthesis. How close was your guess? 19
7. Sulfur in Coal How many tonnes and how many moles of sulfur were contained in the coal consumed worldwide in 1980? 
tonnes of sulfur from coal combustion in 1980 = tonnes of coal consumed in 1980 × sulfur fraction of coal = 3.1×109 tonnes(C) × 0.025 tonnes(S)/tonnes(C) = 7.7×107 tonnes(S)

The following units conversion is used to convert tonnes to moles: tonnes(S) × [10 6 g(S)/tonne s(S)] M [g(S)/mole (S)] [7.7 × 10 7 tonnes(S) ] × [10 6 g(S)/tonne s(S)] = = 2.4 × 1012 moles(S) 32 g(S)/mole( S) moles(S) from coal conbustion in 1980 =
20
10
Chapter II Tools of the Trade A. Steady-State Box Models and Residence Times
having a good question, a fundamental question, and having some tools of inquiry that allow you to take the first step toward an answer those are the conditions that make for exciting science. ---Herbert A. Simon Here you will be handed some of the tools that form the core of environmental science. They include residenceresidence-time methods and box models, models practical methods in thermodynamics and chemical equilibrium kinetics, kinetics and a few relatively simple differential equations. equations …
–
22
11
1. School as a Steady-State System A college has a constant undergraduate enrollment of 14,000 students. No students flunk out or transfer in from other colleges and so the residence time of each student is four years. How many students graduate each year?
M (total stock) T (residence time) total stock of students graduation rate = residence time of students 14,000 = 4 yr = 3,500 /yr
Steady - State condition : Fin = Fout =
23
2. The Water Above What is the residence time of H 2O in Earth’s atmosphere? 
Assume the atmospheric H2O is in steady state Fw=Fout
Fw: flow of H2O into the atmosphere Fout: the flow out = the global precipitation rate  From the Appendix, Fw= 5.18 × 1014 m3 /yr Mw= 1.3 × 1013 m3 (the stock of H2O )  The residence time Tw = Mw /Fw = 0.025 yr = 9.1 days 24
12
3. Carbon in the Biosphere What are the residence times of carbon in continental and marine vegetation? 
From the Appendix, Stock of living continental biomass Mt = 5.6 1015 g(C) Continental net primary productivity Ft = 5 1016 g(C)/yr Stock of living marine plants M o = 2 1015 g(C) Marine net primary productivity Fo =2.5 1016 g(C)/yr
Tterrestrial = Mt / Ft = 11.2 yr  Toceanic = Mo /Fo = 0.08 yr 
1 month
25
4. Natural SO 2 (1/2) Natural sources add sulfur dioxide (SO 2) to the atmosphere at a rate of about 10 8 tonnes(S)/yr. The background concentration of atmospheric SO2, measured in remote areas where anthropogenic sources are not likely to have much influence, is about 0.2 parts per billion, by volume [ppb(v)]. What is the residence time of atmospheric SO2 in the remote regions ? 
Known: Flow of SO2 to the atmosphere: F = 10 8 tonnes/yr The concentration of atmospheric SO2: 0.2×10-9 26
13
4. Natural SO 2 (2/2) Let’s determine how many moles of air Earth’s atmosphere contains. m 5.14 × 1021 g = 1.8 × 1020 moles of air N air = = M 28.85 g/mol  Moles of SO2 is the product of moles of air times molar fraction of SO2. 
N SO 2 = (1.8 × 10 20 ) × (0.2 × 10-9 ) = 3.6 × 1010 mols of SO 2 Next,
we must calculate the mass of SO2 m SO 2 = 32 × (3.6 × 1010 ) = 1.15 × 1012 g(S) = 1.15 × 10 6 tonnes(S)
The residence time
m SO 2 1.15 × 10 6 tonnes(S) = = 0.0115 yr = 4.2 days T= F 10 8 tonnes(S) /yr 27
5. Anthropogenic SO 2 (1/2) With anthropogenic sources included, what is the globally averaged SO 2 concentration in the atmosphere? What is the SO 2 concentration in industrialized regions like the northeastern United States?  Referring to the
Appendix, anthropogenic sulfur emissions to the atmosphere were about 8.5 ×107 tonnes(S)/yr.  Therefore, the globally averaged total SO 2 concentration will be about 85% of the natural background concentration, or 0.85×0.20ppb(v) = 0.17 ppb(v). 28
14
5. Anthropogenic SO 2 (2/2) 
Approximate regional concentration of SO2 is obtained, The fraction of anthropogenic SO2 concentration SO2 produced in the Northeast in the region The fraction of Earth’s area occupied by this air shed
Regional concentration of SO2 ＝
0.17 × 0.12 = 10.2 ppb(v) 0.002
29
6. A Polluted Lake (1/2) A stable and highly soluble pollutant is dumped into a lake at the rate of 0.16 tonnes per day. The lake volume is 4 107 m3 and the average water flow-through rate is 8 104 m3 /day. Ignore evaporation from the lake surface and assume the pollutant is uniformly mixed in the lake. What eventual steady-state concentration will the pollutant reach? Known:
The stock of water Mw= 4×107 m3 The rate of water flow-through Fw =8×104 m3 /day The pollution input rate Fp=0.16 tonnes/day
30
15
6. A Polluted Lake (2/2) 
The residence time of water in the lake Mw 4 ×107 m3 Tw = = = 500 days Fw 8 ×104 m3 /day

∵ Tp=Tw (Because the pollutant is uniformly mixed in the lake) ∴ Mp=FpTp=0.16 tonnes/day × 500 days = 80 tonnes

If we multiply the volume of a cubic meter of water by the density of water, we discover that a cubic meter of water weighs exactly one metric ton. ∴ m =V × D = 4×107×1 = 4×107 tonnes (water) w w w

The steady-state concentration of pollutant: 80 tonnes pollution -6 2.0 10 = × = 2 ppb(w) 4 × 107 tonnes water 31
7. The Flow of Atmospheric Pollutants between Hemisphere (1/6) Ethane (C2H6) is a constituent of natural gas. It is emitted to the atmosphere whenever natural gas escapes unburned at wells and other sources, a process that constitutes the only major source of ethane in the troposphere of the northern hemisphere, CN, is roughly 1.0 ppb(v), and the average concentration in the southern hemisphere, CS, is roughly 0.5 ppb(v). Ethane can exit from the troposphere by any of three mechanisms: passage to the stratosphere; chemical reaction resulting in transformation to other chemical species; and deposition to Earth’s surface (for example, by washout from the atmosphere in rain or snow). It can also leave one hemisphere’s troposphere by flowing to the other’s. 32
16
7. The Flow of Atmospheric Pollutants between Hemisphere (2/6) Assuming that the total exit rate from each hemisphere’s troposphere is proportional to the concentration in the respective troposphere, and knowing that 3% as much natural gas escapes to the atmosphere unburned as is burned, estimate net rate of ethane flow cross the equator.
33
7. The Flow of Atmospheric Pollutants between Hemisphere (3/6)  According to the Appendix, natural gas was burned at a rate of 6×1019 J/yr, and the energy content of natural gas is 4 ×107 J/m3(STP).
Because one mole of any gas (STP) occupied 22.4 liters, there are 44.6 moles of gas in a cubic meter. Therefore, natural gas was burned at a rate 6 × 1019 J/yr R= × 44.6 moles/m3 = 6.7 × 1013 moles/yr 7 4 × 10 J/m3  Since
natural gas escapes to the atmosphere at a rate equal to 3% of R, and since 6% (on a mole-per-mole basis) of natural gas is ethane. EN + ES = (0.03)(0.06)(6.7×1013 moles/yr) = 1.2×1011 moles/yr (1)
 Because nearly
all natural gas is mined and vented in the northern hemisphere, we’ll assume that E S = 0 (2)
34
17
7. The Flow of Atmospheric Pollutants between Hemisphere (4/6) 
The steady-state conditions on XN and XS are, respectively: EN + αXS = αXN + βXN (3) ES + αXN = αXS + βXS (4) ( ∑inflow= ∑outflow )

Add the equations together: EN + ES = β(XN + XS)

Substitute Eq.(5) to Eq.(3)
⇒ β =
E N + ES X N + XS
(5)
XN
XS: the amounts of ethane in the two boxes (hemispheres) EN ES: sources term (emissions to the boxes from the ground) XN XS: flow across the equator 35 XN XS: sinks within each box
7. The Flow of Atmospheric Pollutants between Hemisphere (5/6) 
Yield the interhemispheric flow rate, (E N + E S ) X N X N + XS E X − ESX N = N S (6) X N + XS
α (X N − X S ) =

EN −
From the Appendix we learn that the number of moles in the atmosphere is 1.8×1020, so
1.8 × 1020 moles(air) moles(ethane) × 1× 10-9 = 0.9 × 1011 moles(ethane) XN = 2 hemispheres moles(air) (7)
Similarly,
X S = 0.45 × 1011 moles(etha ne)
(8) 36
18
7. The Flow of Atmospheric Pollutants between Hemisphere (6/6)  Substituting
Equ.(1), (2), (7) and (8) into Equ.(6), we determine the net rate of flow of ethane across the equator:
(1.2 × 10 11 )(0.45 × 10 11 ) - 0 α (X N - X S ) = 0.9 × 10 11 + 0.45 × 10 11 = 0.40 × 10 11 moles/yr
37
8. A Perturbed Phosphorus Cycle (I) (1/6) The box model shown in Figure II-8 can be used to study phosphorus cycling in a lake. In the model, X1 represents the amount of phosphorus (P) in living biomass, X2 represents the amount of phosphorus in inorganic form, and X3 represents the amount of phosphorus in dead organic material. Each Xi is in units of micromoles of phosphorus per liter of lake water. Fij is the flow of phosphorus from stock i to stock j.
Figure II-8
38
19
8. A Perturbed Phosphorus Cycle (I) (2/6) In the steady state, X1=0.2 micromoles(P)/liter, X 2=0.1 micromoles(P)/liter, and the residence time of phosphorus in living biomass is 4 days. Assume that at time t=0, the system is perturbed by the sudden addition of 0.02 micromoles(P)/liter to the inorganic phosphorus compartment, but the rate constants , , and remain unchanged. When a new steady state is reached, how much phosphorus will be in each compartment?
39
8. A Perturbed Phosphorus Cycle (I) (3/6)  The first step is to determine the numerical values
of the rate constants
,
, and
.
 Let
the initial steady state be characterize by values of the Xi denoted X i .  The steady-state conditions are derived by setting the inflow to each box equal to the outflow from that same box: β X 2 X1 = γ X1 , α X 3 = β X 2 X1 , γ X1 = α X 3 . (c) (a) (b) 
With numerical values for the X i substituted in, we get 0.02 β = 0.2γ , α = 0.02 β , 0.2γ = α . (1)
(2)
(3)
The Eq.(3) can be derived from Eqs.(1) and (2), so this redundancy means that we don’t have enough constraints to determine the three rate constants.
40
20
8. A Perturbed Phosphorus Cycle (I) (4/6) 
We have to use one other piece of information － the residence time of P in living biomass is 4 days.
X1 = 4 days (4) γ X 1 
( The stock of P in living biomass is divided by the flow of P in or out in steady-state. )
Combining Eq.(4) with Eqs.(1) and (2), it follows that γ = (4 days) -1 β = (0.4 days) -1 [micromole s(P)/liter ]-1 α = (20 days) -1
41
8. A Perturbed Phosphorus Cycle (I) (5/6) 
Now we can solve the problem easily.

Call the new values of the Xi, after the perturbation and after a new steady state is reached, X ′i .

The X′i must satisfy the same steady-state equations (Eqs.1-3) satisfied by the X′i , because the rate constants have not changed.

The new steady-state conditions are X′3 X1′ X′2 X1′ X′2 X1′ , . = = 0.4 4 20 0.4 X′2 = 0.1 micromoles(P)/liter ⇒ X′3 = 5X1′ .
(5) (6) 42
21
8. A Perturbed Phosphorus Cycle (I) (6/6) 
Finally, we can make use of the fact that the addition of phosphorus was 0.02 micromoles(P)/liter.  Because phosphorus flows in a
closed cycle, the total amount present initially plus the amount added to the system at t=0 must equal the total amount present for all times subsequent to t=0. Hence, X1′ + X′2 + X′3 = 0.02 + X1 + X2 + X3 = 0.02 + 0.2 + 0.1 + 1 (7) = 1.320  Substituting Eqs.(5) and (6) into Eq.(7), and by Eq.(7),
X1′ + 0.1 + 5X1′ = 1.320 X1′ = 0.203 micromoles (P)/liter ⇒ X ′3 = 1.017 micromoles (P)/liter 43
9. Where Would All the Water Go? (1/6) If evapotranspiration from Earth’s land area were to diminish by 20% uniformly over the land area, as might result from widespread removal of vegetation, what changes would occur in the globally averaged precipitation on the land surface and in the globally averaged runoff from the land to the sea?
44
22
9. Where Would All the Water Go? (2/6) 
To solve the problem, a systematic look at the global water budget is helpful. The following water flow rates can be defined:
ELL: rate of evapotranspiration from the land that falls as precipitation on
the land ESS: rate of evaporation from the sea that falls as precipitation on the sea ESL: rate of evaporation from the land that falls as precipitation on the land PL: rate of precipitation on the land PS: rate of precipitation on the sea R: rate of runoff from the land to the sea 45
9. Where Would All the Water Go? (3/6)  Our problem can now be restated in terms of these definitions:
How will R and R L change if E LL and E LS both diminish by 20%?  There are 3
water-conservation relations among the 7 quantities we have defined. PS + R = ESS + ESL (1)  Water is conserved in the sea.
PL = R + E LL + E LS (2) (3) R + E LS = ESL

Water is conserved on land.

Rate of water flow from land to sea equals the rate from sea to land.
 Any
two of these can be derived from the third plus the two identities that follow from the definitions: PL = E LL + E SL (4) PS = E SS + E LS (5)
46
23
9. Where Would All the Water Go? (4/6) All told, there are 3 independent relations among the 7 quantities. Thus, 4 independent empirical values are needed to determine all 7 quantities.  From the Appendix, values for P L, PS, and R are given.

PL = 108 × 10 3 km 3 /yr, 
PS = 410 × 10 3 km 3 /yr,
R = 46 × 10 3 km 3 /yr.
The 4th piece of information is that approximately 25% of the evapotranspiration from the land precipitates on the sea, while 75% or 3 times as much, precipitates on the land.
E LL = 3E LS 
With the 4th information and the Eqs.(1)(2)(3), we obtained: E LL = 46.5 × 103 km 3 /yr, E LS = 15.5 × 103 km 3 /yr E SS = 394.5 × 103 km 3 /yr, E SL = 61.5 × 103 km 3 /yr 47
9. Where Would All the Water Go? (5/6)  If
the reduction in evapotranspiration is uniformly distributed over the land, it’s reasonable to assume that E LL and ELS each decrease by 20%.
primed quantities ( PL′ , PS′ , R ′, etc.) to denote the rates subsequent to the 20% decrease in evapotranspiration, we can write E′SS = E SS′ , E′SL = E SL′ (6) E′LL = 0.8E LL′ , E ′LS = 0.8E LS′
 Using
 Then, setting up
new conservation equations and identities for the primed quantities, the primed versions of Eqs.(3) and (4) become: R ′ = E ′SL - E ′LS PL′ = E ′LL + E ′SL
(3’) (4’) 48
24
9. Where Would All the Water Go? (6/6) 
Use Eq.(6) then leads to R ′ = E ′SL - E ′LS PL′ = E ′LL + E ′SL

Use Eqs. (3) and (4), these can be written as R ′ = R + 0.2E LS PL′ = 0.8E LL + E SL

Numerically, R ′ = (46.0 + 3.10) ×103 km3 /yr , which is about 7% increase over R; and PL′ = (108- 9.30)×103 km3 /yr , which is about a 9% decrease from PL. 49
10. Aluminum in the Himalaya (1/5) In a remote area in Nepal, the concentration of aluminum (Al) in outdoor air at ground level averages 9.4 10-8 g/cm3. (It is much higher inside the Sherpa dwellings because of wood and yak dung burning). At the same site, the Al concentration in the top 1 cm of fresh snow averages 0.12 g/g , while in the top 1 cm of three-day-old snow it averages 0.20 g/g . (a) Calculate the average deposition velocity of the Al falling to the ground when it is not snowing. (b) How large are the particles to which the falling aluminum is attached?
50
25
10. Aluminum in the Himalaya (a) (2/5) 
The flow is 0.20-0.12= 0.08 g(Al)/3 days. This is the rate of increase of aluminum concentration in the top centimeter of snow.

Since ρfresh snow=0.1 g/cm3, and the aluminum was measured in 0.1 g (snow)/cm2 of surface. Hence, the flow can be expressed as µ g(Al) g(snow) × 0.1 0.08 2 g(snow) cm = 0.0027 µ g(Al)/cm2 day F= 3 days

The stock in the atmosphere is M= 9.4×10-8 μg/cm3 .

The deposition velocity is
F = 2.9 × 10 4 cm/day = 0.34 cm/sec . M 51
10. Aluminum in the Himalaya (b) (3/5) 

To calculate the size of the particles falling at this speed, a digression is needed. Stokes Law describes the rate at which objects fall through a medium like air or water, provided the velocity of the object is small enough to create no turbulence. The law states that the frictional drag force on a spherical object is F = 6 πη vr . Stokes Law is a applicable provided a certain quantity called the Reynolds number, R, defined by R = m vr/ η is less than about 0.5. : viscosity of the medium v : velocity r : the object’s radius m: density of the medium
52
26
10. Aluminum in the Himalaya (b) (4/5) 
A falling object soon reach a terminal velocity in which the frictional force retarding its motion equals the gravitationalminus-buoyancy force pulling it downward.  For a particle falling through air the buoyancy 6πη vr is negligible and so the downward force is the frictional force product of mg. resisting downward  Hence the terminal velocity can be calculated motion by setting 6πη vr = mg . (1) mg gravitation al force downward

We know the values of everything in Eq.(1) except r and m. Next, we’ll find the value of m.
Fig. II-11 53
10. Aluminum in the Himalaya (b) (5/5) Assuming the particles to which aluminum is attached are spherical, r is their average radius.  It’s very reasonable assumption that the density of the particle, ρp, is very roughly equal to 1 g/cm 3, the density of water. This is because small particles falling from the atmosphere are often actually aerosols. Aerosols may contain water; but even if dry, they are comprised of fluffy solids－irregular hollow structures less dense than typical solid materials forming Earth’s crust. Thus, we 4 find m = π r 3 ρ p . 3  Rewriting Eq.(1) yields 1 1 ⎛ 4.5η v ⎞ 2 ⎛ 4.5 × 1.72 × 0.34 × 10 - 2 ⎞ 2 ⎟ =⎜ ⎟ r = ⎜⎜ 4 ⎜ ⎟ ⎟ 6πη vr = π r 3 ρ p g ⇒ ρ g 1 9.8 × p ⎠ ⎝ ⎠ ⎝ 3 = 0.05 m = 0.0005 cm = 5 microns. 
54
27
11. An Indoor Risk (1/7) Radioactive radon gas (Rn 222) enters an average building at the rate of one picocurie per second per square meter of foundation area. Consider a house with a foundation area of 200 m2 and an air volume of 1000 m 3. Assume that the house is well designed for energy conservation so that the ventilation rate is low and only one tenth of the air in the house is exchanged with outdoor air every hour.
55
11. An Indoor Risk (2/7) (a) What will be the average steady-state concentration of Rn 222 in the house? (b) In the steady state, what whole-body radiation dose, in rads/yr, will an adult male receive directly from Rn222 decay 12 hr a day in the ) house? (rad: 
The rate of decay is called the activity and it can be written activity(t) = λ N(t) (1) (Unit: number of decaying atoms/time)

Here,
is a rate constant related to the half-life λ =
ln 2 0.693 = (2) T1 2 T1 2
by 56
28
11. An Indoor Risk (a) (3/7) 

The equilibrium value of N is determined by setting the rate of inflow of Rn 222 atoms equal to the rate of outflow (see Fig. II-11). The rate of inflow of Rn222 is determined by Fig. II-11 the source term, 1 pCi/m2sec. For a house with a foundation area of 200 m 2, this is ( 1 pCi/m2sec = 2 200 pCi/sec or 200 × 0.037 = 7.4 decays/sec 0.037 decays/sec2 )
That is, Rn 222 activity enters the house at a rate of 7.4 decays/sec2. 
Eq.(1) tells us that the number of atoms of an N(t) = activity(t) λ isotope equals λ-1 times the activity of that isotope. Therefore, Fin (The rate at which atoms of Rn 222 enter the house) =
the rate at which activity due to Rn 222 enters the house λ (the rate related to the half - life)
57
11. An Indoor Risk (a) (4/7) 
Using the value of T1/2 for Rn222 of 3.8 days, or 3.3 ×105 sec, we obtain
0.693 = 2.1×10-6 /sec. 5 3.3×10 7.4 = 3.5×106 atoms/sec.  Therefore, we determined that Fin = λ =
λ

The outflow rate consists of two terms: 1. loss of Rn222 by radioactive decay in the house ( Fout,decay). This decay rate is simply the activity λ N = 2.1 × 10 -6 N /sec. 2. outflow resulting from ventilation (Fout,vent). The ventilation rate is 0.1 air exchanges per hour, then 1/10 of the Rn 222 in houses is removed every hour as well. Hence, the 2 nd term in the outflow rate is 0.1N /hr or 2.8×10-5N /sec. 58
29
11. An Indoor Risk (a) (5/7) 
Combining two outflow terms, we find Fout = Fout,decay + Fout, vent = (2.1× 10-6 + 2.8 × 10 -5 )N = 3.0 × 10-5 N/sec

The steady-state value of N now can be calculate by Fin = Fout 3.5 × 10 6 /sec = 3.0 × 10 -5 N/sec
Hence, N = 1.17 ×1011 atoms N . The steady-state concentration, C, will be C = ⇒ C=
11
1.17×10 = 1.17×108 atoms/m3. 1000
V
59
11. An Indoor Risk (b) (6/7) 
Assume that during the 12 hr indoors, the adult male typically has at any time about 1.2 liters of freshly breathed air in his lungs. The concentration tells us that this much air will contain (1.2×10-3) × (1.17×108) = 1.4×105 atoms of Rn222.

The activity of the lung air is λ N = (2.1 × 10 -6 ) × (1.4 × 10 5 ) = 0.29 decays/sec

Thus during a typical year of 12-hr days in the home, our subject’s lungs will endure 365×12×3600×0.29 = 4.6×106 Rn222 decays.

To estimate the whole-body dose, we must determine the number of ergs deposited in the body and divided by the number of grams of body weight. 60
30